By pressing this button, the
fan switches from one
breeze mode to another.
MODE
By pressing this button, you
activate the "mosquito
repellent" function. By pressing
it again, this function will stop.
Press this button to change
the fan to 4 comfort speeds
(High/Medium/Low/ECO).
This button can be used
SPEED
with any function.
To activate the oscillation
function, press this button
once.
OSCILLATION
Use this button to turn the fan on and off.
ON / OFF
This fan has 3 functions that will allow you to better personalise your comfort and
improve air circulation in the room :
Oscillation :
To activate the oscillation function, press the
function, press
Tilt :
To tilt the fan head so that the breeze is angled, turn off the fan and hold the fan motor
housing with one hand and grasp the fan grille with another. Gently tilt the fan head
until it reaches the desired angle. Be careful not to tilt the head further back than
expected, as this will damage the unit.
Important : The fan must be turned off before tilting the fan head.
Height adjustment :
To adjust the fan height, turn off the fan, tighten between the top column (#8) /
adjustable column (#12) and loosen the height adjustment lock nut (#13). Extend or
again. Oscillation control can be performed during fan operation.
This light indicates that the fan is simulating a natural breeze
mode through all speeds.
This indicator light indicates that the fan is simulating a softer
breeze mode (SLEEP MODE) by using a low speed, ideal for resting.
and
l
If both of the above indicators are not lit, the fan is operating in
NORMAL mode.
The light on this icon indicates that the mosquito repellent
function is active. By pressing this button again, this function stops.
These icons indicate the selected speed ECO, low, medium, high.
The oscillation indicator lights up when it is activated. Press the
button again to disable this function. The oscillation can be controlled
during fan operation.
button. To disable the oscillation