Gb Multifunctional Vice - WISENT 27772441 Manual De Instrucciones

FIGURE:
1. Lever
2. Fixed screws
3. Vice body
4. Frame
5. Vice jaws
6. Vice screw
INSTRUCTIONS FOR USE:
During the operations, the vice must be fixed with screws on the work table.
The part should be well fixed using the lever. Afterwards it can be filed off, cut by saw, drilled or
threaded. In addition, various devices of small size can be caught.
During use, if necessary, the screw 2 can be locked, and a visibility angle suitable for other opera-
tions can be chosen.
!
ATTENTION:
Check if the jaw screw is locked during use. If so, tighten it with a wrench.
To avoid injury, before use you must fit the bodies 3 and the frame 4.
During use is not allowed to use extended levers, nor to use a heavier hammer (max. 500 g). Thus
the parts shall not be damaged.
Wear gloves during use.
Take care not to damage the vice or the part in question. Never hammer out the vice or tap it with
something similar.
Multifunctional vice
Instructions for use
2
3
2
4
13
5
5
GB
1
6