Tabla de contenido
Idiomas disponibles
Idiomas disponibles
– To avoid the risk of fire or electric shock, you should not
dismantle the water kettle or the base unit.
– The appliance contains no user-serviceable parts. Any repairs
may only be carried out by authorised service personnel.
– During use, do not place the base unit on a metal tray or
a metal surface.
SAVE THESE INSTRUCTIONS!
AUTOMATIC ON/OFF SWITCH
Your kettle has an automatic ON/OFF switch and switches
off automatically as soon as the water boils. After the
water has boiled, wait for approx. one minute before
attempting to heat the water again. Do not attempt to
hold the ON/OFF switch in the "ON" position, or to impede
its function.
SWITCHING OFF THE KETTLE MANUALLY
The ON/OFF switch (
kettle before the water boils.
SAFETY CUT-OFF
The kettle is protected against damage resulting from use
with an insufficient volume of water. A safety cut-off will
automatically disconnect the power supply if the heating
element overheats.
Should the kettle ever boil dry during operation, you must
leave it to cool for 10 minutes before re-filling it with cold
water. The safety cut-off will reset automatically once it has
cooled.
BEFORE USING THE KETTLE
Clean the kettle before using it for the first time by filling
it completely (to the MAX mark) with water, boiling the
water, and then discarding the water.
HOW TO USE THE WATER KETTLE
FILLING THE WATER KETTLE
– Remove the appliance body from the base unit (
– Open the lid (
Do not fill the kettle with less than 0.25 l / 8 oz
and not more than 1.7 l / 57 oz (above the MAX
mark), to prevent the kettle from boiling dry or
boiling water escaping from the spout of the
closed lid (
) can also be used to switch off the
➎
) and fill with water.
➊
).
➊
).
➐
5
Tabla de contenido
