U-Tec Ultraloq U-Bolt Pro Z-Wave Guía De Instalación Y Usuario página 17

4. Standalone Mode Programming Guide
It is recommended to use U-tec App to program your lock. If
you don't have a smartphone or don't want to use the App, you
may follow the programming instructions below.
Warning
Standalone Mode is NOT available after the lock is registered
in App! Please reset the lock to Factory Default Mode first to
program your lock in Standalone Mode.
4.1 Add Admin Code in Standalone Mode
Admin Code must be created first prior to any other programming.
Only one Admin Code is available.
Operation
Hold
Enter 4-8 digit Admin Code
and press
Enter the Admin Code again
and press
Success
4.2 Add User Code in Standalone Mode
Operation
Hold
Enter 4-8 digit Admin Code
and press
Enter 4-8 digit User Code
and press
for 3 sec
for 3 sec
- 16 -
Indicator
2 beeps with flashing
green light
1 beep with green light,
then flashing green light
2 beeps with green light
All lights off
Indicator
2 beeps with flashing
blue light
2 beeps with green light,
then steady blue light
1 beep with green light,
then steady blue light