Konix MYTHICS SPACESHIP Manual Del Usuario página 6

PRODUCT INSTRUCTIONS :
1/ Place and fix the console on the DOBE cooling stand with the
fixing screw that comes with the package. (Please not to use the
original fixing screw from the P5 console)
2/ Place the cooling stand on a desk, connect the stand and the
console by inserting both the 2 USB-A plugs to the back of the
P5 console, insert the Type-C plug to the stand.
NOTE :
Both of the two USB 2.0 plugs must be inserted into the two
USB 3.0 female ports on the back of the console at the same
time. If either USB 2.0 plugs is unplugged, the following issues
may arise: insufficient power supply, interruption of data trans-
mission, output voltage below the required 5V standard, ab-
normal charging, or an error message "Excessive external USB
device" on the TV screen.
3/ Remove the Type-C adapter from the controller and place it
in the adapter storage slots on the left /right side of the games
disc slots on the back of this stand.
4/ In order to maintain and maximize the lifespan of P5 control-
lers, please do not remove controllers while they are being
charged. When the battery level of the controller reaches 80% or
above, if you remove the controller and put it back, the control-
ler will not be charged due to the battery
protection function. The dock will continue to charge only after
the battery level of the controller falls below 80%.
6