Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Temperature
settings do not
change
"Cool On" or
"Heat On" is
flashing
"Heat On" is
not displayed
"Cool On" is
not displayed
Need Help?
For assistance with this product, please
visit honeywellhome.com/support.
Or call Customer Care toll-free at
1-800-468-1502.
CAUTION
Equipment damage hazard
To prevent possible compressor damage, do not operate cooling
system when outdoor temperature is below 50°F (10°C).
Make sure heating and cooling temperatures are set to
acceptable ranges:
• Heat: 40° to 90°F (4.5° to 32°C).
• Cool: 50° to 99°F (10° to 37°C).
• Compressor protection feature is engaged. Wait 5 minutes
for the system to restart safely, without damage to the
compressor (see page 4).
• Set the System switch to Heat, and set the temperature
level above the current room temperature (see page 3).
• Set the System switch to Cool, and set the temperature
level below the current room temperature (see page 3).
Pull at bottom
to remove
thermostat
from
wallplate.
Turn thermostat
over to find model
number and date
code.
4
Tabla de contenido
