Technical Specifications; Customer Support - TriPollar STOP Manual Del Usuario

troubleshooting
In the event that your TriPollar
®
contacting the service center, take the following precautions:
1. Make sure you have removed the devices' protective cover before use.
2. Make sure the electric cord is securely connected to device.
3. Make sure power button was pressed and the green indicator light
appears.
4. Make sure you have applied the TriPollar
to instructions above. TriPollar
preparation gel is not applied.
6
STOP device is not working and prior to
™
preparation gel according
®
STOP will not work properly if
® ™

technical specifications

Weight: 85gr
Physical Dimensions: H=134mm L=51mm W=32mm
TriPollar RF Frequency: 1MHz
®
Operating conditions: Temperature: +5°C to +30°C
Humidity: 20RH to 80RH
Rating: AC 100Vac to 240Vac 0.6 A 50/60Hz
DC 7V/8V/9V 1.5A
Transport and Storage: Temperature: 0°C to 40°C
Humidity: 10RH to 90RH
Electrical Safety: Power supply is classified as Class ll - double
insulation

customer support

For service, please refer to the store where you purchased the TriPollar
STOP or visit our website for a store locator: www.stop-age.com.
™
When reporting to local service center, please have the device serial number
ready. The serial number can be found on the top panel of the device.
Customer satisfaction is our top priority. To help us provide you with the
best support possible, please send us your comments and suggestions.
Contact details can be found on the back cover of this user manual or via
our website at: www.stop-age.com
®