yrco WS 440 HF Manual De Instrucciones página 18

2 Lubricate the feeder gears daily with the supplied grease
gun with a couple of strokes. There are two grease
nipples on the saw, one for the travel feed gear and one
for the pivot arm feed gear. Use PETRO CANADA
PERLESS OG2 or similar grease.
3 In order to fit the blade shaft as easily as possible in the
blade flange, it is sometimes necessary to clean and
lubricate it. Check daily that the blade shaft turns freely
and that the hexagon is not damaged.
4 Check that the saw carriage is correctly adjusted with
respect to the guide wheels and that the locking handle is
correctly adjusted. See the adjustment section for
instructions.
5 Make sure the blade and blade guard are not damaged
and cracked or damaged in any other way. Replace the
blade guard and/or blade if they have been exposed to
abnormal wear. Also check that the blade guard guide
wheel turns without too much resistance, and that the
guide is correctly aligned with the blade guard and the
saw. See the assembly and settings when adjusting
sections.
6 Check that the hoses and cables are intact.
7 Clean the outside of the machine. Do not use a high
pressure washer to clean the saw.
18 –
English
MAINTENANCE