LIMIT 1080 Manual Del Usuario página 6

Size:
Net weight:
Standard outfit:
Optional accessories:
Changing batteries:
1. Battery cover located under as showed in picture 1.
Open by pressing the look to the centre.
2. Operation:
2.1 Turn off the pendulum lock by sliding key marked A in picture 2 two positions. The horizontal 360º laser
line is now on. Press H button (showed in picture 4) to turn on and off the horizontal laser beam.
2.2 Press V button (showed in picture 4) one time to turn on V1 360º vertical laser line (showed in picture 3).
2.3 Press V button two times to turn on V2 360º vertical laser line.(showed in picture 3).
2.4 Press V button three times to turn on V1 and V2 360º vertical laser.
2.5 Press V button four times to turn off V1 and V2 360º vertical laser line.
2.6 Press V button five times and it will come back to the status "2.2" in the cycle.
2.7 Press P button (showed in picture 4) to turn on pulsation laser light. This enables to use the optional
receiver but makes the laser beam a little weaker.
2.8 Press P button to turn off pulsation laser light. This makes the laser beam stronger.
Notice
1. The laser unit should be put on a level surface, such as desktop, ground, tripod, etc. Self-levelling range
is ±3°, the laser lines will start flash and a busser will start sounding if the laser is out of self-levelling
range.
2. Make sure to lock the pendulum when not using and it is stowed away for safe keeping.
125x82x122mm. (Including cone window height)
560 g.
main unit, small tripod, magnetic wall bracket,
target plate, small 5/8"->1/4" adapter, manual,
batteries, protection bag.
Li-ion battery, charger, power adapter,
detector with clamp, 5/8" tripod adapter,
different tripods, laser glasses.
2
English