LIMIT LDA150 Manual Del Usuario página 5

OPERATION
Display symbol
REF
H
-1-
-2-
ERRO
Note: When turned upside down the display will automatically be rotated.
1. Power On and Off
1.1 Press the ON/REF/OFF key once to turn the unit on.
1.2 To turn off the unit, press and hold the ON/REF/OFF key for 3 seconds.
1.3 The unit will turn off automatically if there is no operation in 5 minutes.
2. Absolut and relative measurements
2.1 When no symbols are shown in the display. The device will show the absolute value.
2.2 Push ON/REF/OFF key to set relative zero point. REF icon will appear in the display
and the device will show the relative value.
2.3 To return to absolute function, press the ON/REF/OFF key.
Absolute Mode Absolute Mode
HOLD/SOUND
UNIT
CAL
LIGHT
ON/REF/OFF
LDA150
Absolute/IP65
3. +/- Symbol
3.1 The +/- symbol indicates the direction on how to adjust the surface to reach
horizontal plane.
Replace batteries. Voltage below 2.2 V
Summer function is activated
Relative measuring mode
HOLD function is activated
Calibrating for first direction
Calibrating for opposite direction
Appears when vertical angel > 30˚
Relative Mode Relative Mode
Horizontal plane
Absolute Mode
Horizontal plane
3
GB