BLAZE EVERCADE VS Guia De Inicio Rapido página 4

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
How to play games on the Evercade
VS:
1. Insert an Evercade game cartridge into the
VS console cartridge bay, sticker side down.
2. Push the "ON/OFF" switch to "ON" to turn
on the console.
3. Press Left, Right, Up or Down on the D-Pad
to move between games and select your
preferred game.
4. Press the "A" Button to enter the selected
game menu
5. Select Play and press "A" to start your game
How do I pause the game?
1. During gameplay press the Menu Button to
pause the game.
2. Resume the game by pressing the Menu
Button again.
Note: Some games allow you to Pause the game
by pressing "START" or "SELECT".
How do I exit the game?
1. During gameplay press the Menu Button to
bring up the game menu.
2. Use the D-Pad to move down the menu to
"Quit Game"
3. Press the A Button to confirm.
How do I save my gameplay?
1. During gameplay press the Menu Button to
bring up the game menu.
2. Use the D-Pad to move down the menu to
"SAVE" (You can also use the "QUICK SAVE"
option which will automatically save to slot 1)
3. Move the D-Pad to your preferred game
slot number.
4. Press the A Button to save the current game
progression in the selected slot.
5. You will be returned to the game.
06
How do I load a previously saved
game?
1. During gameplay press the Menu Button
to bring up the game menu. (You can also
access your saves by selecting "Recent
Save" on the game selection menu)
2. Use the D-Pad to move down the menu to
the desired save state you want to load
(Quick Load will load your most recent Quick
Save for the game).
3. Press the A Button to load this saved game.
You will immediately re-enter the game at
the saved point. If there is no saved game in
this slot you will return to the game at the
point of pressing the Menu Button.
How do I delete a save game?
For the save game you would like to delete,
Press X on the game slot in the in-game menu.
How do I change the console menu
language?
1. On the main menu, press Left on the D-pad
to get to the Settings Menu (cog) button.
(This is also selectable in game by pressing
the Menu button)
2. In the Settings Menu, use the D-Pad to move
down to Language select.
3. Move the D-Pad right or left to select the
desired language.
4. Press the A Button to confirm.
How do I change the screen ratio or
add a filter?
1. On the main menu, press left on the D-Pad to
get to the Settings Menu (cog) button. (This
is also selectable in game by pressing the
Menu button)
2. Move the D-Pad down to "Screen Ratio" to
bring up all the options.
3. You can select Original size, Pixel Perfect or
Fullscreen by highlighting your desired option
and pressing A.
4. You can use the same process to select
a filter.
How do I connect the Evercade VS to
the Internet?
1. In the main menu, press left on the D-pad to
get to the Settings Menu (cog) button.
2. In the Settings Menu, use the D-Pad to move
down to Network and press A.
3. Move the D-Pad to select your network and
press A
4. Select A in the password area to bring up
the on-screen keyboard to input your WiFi
password.
5. Press the A Button to confirm.
Problem
Solution
My console doesn't turn on?
Check your console is correctly plugged in at the rear of
the console and at the wall socket. Ensure the Power
Button is pressed down and your HDMI cable is connected.
My console is not performing
Please check your power supply. This console requires
a minimum of 1 amp to ensure correct operation. Use an
as expected (glitches,
alternative power supply that meets this specification.
unresponsive controls)?
My console is unresponsive
Please restart your console. In some cases you may have
remapped a controller which causes unexpected button
or not responding as
presses. Try a factory reset (in the Settings Menu).
expected?
Alternatively, use the controller test mode. (Main menu +
X + Y + L1 + R1 (HOLD MENU TO EXIT). This allows you to see
which buttons are responding and which are unresponsive.
I don't know what power
See Power Information section of this guide.
supply to use?
My controller is
Ensure the controller is plugged in correctly. Use the
controller test mode. (Main menu + X + Y + L1 + R1 (HOLD
unresponsive?
MENU TO EXIT). This allows you to see which buttons are
responding and which are unresponsive.
Need more help please contact:
How do I use the Handheld as a
controller?
1. You first need to have the special Evercade
VS Link Cable (available separately).
2. Plug the link cable into one of the USB
Controller ports at the front with the USB-A
end and use the Micro USB to connect to the
Evercade Handheld's Micro USB Port on the
bottom of the console.
3. Turn on the Evercade Handheld
4. Turn on the Evercade VS
5. On the handheld, go to settings > system >
select activate gamepad mode.
NOTE: A firmware update to your handheld may
be required to enable this feature.
07
Tabla de contenido
loading

Tabla de contenido