Cleaning And Maintenance - EUROM VTW29 Instrucciones

10
oscillate button again to turn off this function. Oscillate button high
= off, low = on.
The timer enables you to set how long you want the fan, and possibly
also the oscillate function, to work. The fan will continue to operate
when the timer is set to ON. If you want to set a specific operating
time, first turn the knob clockwise to OFF and then to the required
number of minutes (max. 120). The fan and oscillation function will
switch off when the knob reaches OFF. You can then turn the knob
from OFF to ON again (continuous operation) or select the desired
operating time.
Please note: you can turn the knob anti-clockwise to reduce the
required number of minutes and from OFF to ON, but never turn the
knob anti-clockwise from ON to 120 minutes! The knob is not
intended to turn from ON to 120 minutes and forcing it will invalidate
the warranty on the timer.

CLEANING AND MAINTENANCE

Always turn the fan off and take plug out of socket before cleaning or
carrying out maintenance work!
Open the safety grille by undoing the small screw and the clamps.
Clean the grille and fan blades with a (slightly humid) soft cloth. Do
not use a corrosive or abrasive cleaning agent! Dry everything
properly.
Keep the engine housing and the opening free from dust and dirt with
a vacuum and/or brush. Do not use any water here!
Further maintenance is not required. Please consult your supplier or
an electrician if you have any problems.
Close the safety grille again (including screw) before using the fan.
Store the fan at the end of the season in a safe, dry place that is not
subject to extremes of temperature, preferably in its original
packaging.