Ferguson REGENT P1 DAB+ Manual De Instrucciones página 27

radio automatically performs a full scan to see what stations are available, the display
shows the scan progress and the total channel number during the scanning.
3. When the scan progress is completed, it will then set the time and start playing the first
station on the station list it finds.
4. To change the station, rotary the Tune/Navigate knob or press " " or " " button to
scroll through the list of stations & tune to the selected station. The Playing screen is
displayed with the new station details.
5. If no stations are detected during the scan the display will show "Service not available".
Notes:
1. Just like Digital TV there are some areas where it may still be difficult to get a good DAB
signal. The broadcasters are constantly improving DAB coverage, so in some cases it may
be necessary to wait before some or all DAB services become available. You can check
coverage for your area.
2. You may also need to start a scan manually to update the list of stations for one of the
following reasons:
- New stations may become available from time to time.
- Stations close or can no longer be received (In the station list, invalid stations are
indicated with a question mark " " ？ in front of their name).
- If reception was not good for the original scan (for example the antenna was not up), this
may result in an empty or incomplete list of available stations.
- If you have poor reception of some stations causing the audio to break up, you may wish
to list only stations with good signal strength.
How to re-do a full scan
To re-do a full scan, you may press and hold the
MENU/INFO button to show the menu and then press Tune/
Navigate knob to select "Full Scan".
Manual Tune
As well as the normal method of scanning, you can also manually tune to a particular
channel/frequency. This can be useful for adjusting your antenna to achieve the best