Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Review this chart to find do-it-yourself
solutions for minor performance
problems. Any service
needed,
other than those described
in this owner's manual, should be performed
by an autho-
rized service representative.
Cleaner won't run.
1.
2.
3.
Poor job of dirt
!.
pick-up.
2.
Cleaner picks up
moveable rugs or
pushes too hard.
Light won't work.
Agitator does not turn,
Air flow restricted
with attachment use,
Sound changes=
Unplugged at wall cutter.
Tripped circuit breaker/blown fuse
at household service pane[,
ON/OFF switch not turned ON.
Ful! or clogged dust bag
Wrong pile height setltng
3. Worn agitator.
4. Clogged nozzle or did tube,
5. Clogged hose.
6. Hole in hose_
7. Broken/mbpbced bell
8. Hose not inserled fully.,
9. Motor protection system aclivated.
10, Dirty filter.,
1. Wrongpile height setting.
1. Burned out light bulbo
1. Broken belt.
2. Belt installed incorrectly,
1. Attachment use restricts
air flow,
2. New carpet fuzz clogged air path,
1. Plug in firmly, push ON/Off switch to
ON,,
2. Reset circuit breaker or replace fuse.
3_ Push onloff switch to ON_
1. Change bag, (pages 11-12}o
2_ Adjust setting, (page 7)-
3. Replace agitator, (page 15).
4o Check CLOG REMOVAL, (page 17).,
5. Check for clogs, (page 17)o
6. Replace hose,
7_ Replace/fix belt, (pages 13-I4).
8. Insert hose fully,(page 6).
9o Check for clogs, (page t7).
10, Crean filter, (page I2)o
!,
Adiust setting,
(page 7),
1.
1o
2,
Change light bulb, (page 16)_
Replace belt, (pagee 13-14).
Check BELT CHANGING AND
AGITATORCLEANING, (pages 13-14)o
1. Check ATTACHMENTS,
(pages 8-9)o
2o Check CLOG REMOVAL and clean
hose, (page 17),
18
Tabla de contenido
