PoolMaster 72706 Guia De Inicio Rapido página 2

Step 1
• Connect three 20'' PVC poles together by inserting into two 2 " couplings as shown.
• Repeat previous step to ensure that there are two sets of connected poles.
Step 2
• Take one of the assembled pole sets and place an Elbow Connector on each end as shown.
• Take the second assembled pole set and place a Tee Connector on each end as shown.
Step 3
• The set with the Elbow Connectors will be the top of the frame.
The set with the Tee Connectors will be the bottom of the frame.
Take the net and slide onto the top of the frame.
Step 4
• Insert a 14 '' PVC Pole through the sides of the net and into each end of the Elbow Connectors.
Step 5
• Take the bottom frame and slide it through the
net loops and connect the bottom frame tee
connectors to the assembled top frame.
Step 6
• Connect the 8'' PVC Poles to each opening of the Tee Connectors. Place a Tee Connector on the
bottom of each 8'' PVC Pole.
Step 7
• Connect the four 14 '' PVC Poles onto
each end of the Tee Connectors to
create the base legs. Place End Caps
on each end.
• Slide and twist the Foam Floats onto
each leg. In ate ball and enjoy.
poolmaster.com
2