Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to:
Be qualified.
Follow the instructions of this manual.
Consider this manual to be part of the total product.
Keep this manual for the entire service life of the product.
Pass this manual on to every further owner or use of the product
Download the last version of the user manual from the internet
Introduction
Thank you for having chosen a FS-UP-1500-DMX. If you follow the instructions given in this manual, we are sure that
you will enjoy this device for a long period of time.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the switched off until it has reached
room temperature.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C connection
cable or on the casing do not take the device into operation and immediately consult your local dealer.
Always plug in the power supply plug least. The power plug must always be inserted without force. Make sure that the
plug is tightly connected with the outlet.
Never let the power-cord come into contact other cables! Handle the power-cord and all connections with the main with
particular caution! Never touch them with wet hands, as this could lead to mortal electrical shock.
Never modify, bend, strain mechanically, put pressure on, pull or heat up the power cord. Never operate next to sources
of heat or cold. Disregard can lead to power cord damages, fire or mortal electrical shock.
The cable insert or the female part in the device must never be strained. There must always be sufficient cable to the
device. Otherwise, the cable may be damaged which may lead to mortal damage.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-cord
from time to time.
If extension cords are used make sure that the core diameter is sufficient for the required power consumption of the
device. All warning concerning the power cords are also valid for possible extension cords.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power-cord by
the plug. Never pull out the plug by tugging the power-cord. Otherwise, the cable or plug can be damaged leading to
mortal electrical shock. If the power plug or the power switch is not accessible, the device must be disconnected via the
mains.
If the power plug or the device is dusty, the device must be taken out of operation, disconnected and the be cleaned
with a dry cloth. Dust can reduce the insulation which may lead to mortal electrical shock. More severe dirt in and at the
device should only be removed by a specialist.
There must never enter any liquid into power outlets, extensions cords or any holes in the housing of the device. If you
suppose that also a minimal amount of liquid may have entered the device, it must immediately be disconnected. This
also valid, if the device was exposed to high humidity. Also if the device is still running, the device must be checked by a
specialist if the liquid has reduced any insulation. Reduced insulation can cause mortal electrical shock.
There must never be any objects entering into the device. This is especially valid for metal parts. If any metal parts like
staples or coarse metal chips enter into the device, the device must be taken out of operation and disconnected
immediately. Malfunction or short-circuits cause by metal parts may cause mortal injuries.
Keep away children and amateurs. Never leave this device running unattended
User manual MAQUINA DE HUMO-HAZE MACHINE, FS-UP-1500-DMX | Rev. May 2014
Tabla de contenido
