Tabla de contenido
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT
THE FURNITURE TIPS OVER. PLEASE INSTALL THE
SAFETY WALL STRAP BEHIND THE FURNITURE TO
ENSURE SAFETY.
PLEASE READ ALL INSTRUCTIONS CAREFULLY
BEFORE USING THIS PRODUCT AND KEEP THEM FOR
FUTURE REFERENCE.
HOLE
HOLE
Safety Wall Strap
Tools required (Not Included) :
• Rubber Mallet
• Phillips Screw Driver
Step1: Attach bracket A securely to the back side of the
furniture using the short screw D, through the smallest hole of
the bracket A.
Step 2: Locate a wall stud in the wall. Place another bracket A
on the wall over the wall stud and 2 inches below the first A
secured to the back of your unit, using the long screw C
provided and through the smallest hole of A. Repeat Step 1
and 2 for the other side of the furniture when applicable.
Note: When wall studs are not available, depending on the wall
material you might require a wall anchor (not included). Ask
your local hardware store for more information.
Step 3: Place the furniture so that wall and furniture mounting
brackets are vertically in line. Lace the end of the safety wall
strap B through the larger hole of each A.
Bring both ends together and slide the flat end through the
locking end. Pull it until all slack is removed.
Step 4: Confirm that the strap is securely laced
and locked. To move the furniture after the
safety wall strap has been installed, simply
remove screw(s) C from the wall.
B
A
x 4
x 2
• 3/8" Drill Bit
• Electric Drill
C
D
x 2
x 2
1 8
Tabla de contenido
