AIPTEK PENCAM Manual Del Usuario página 8

English
Change mode to "CL"
"CL" is displayed
Press SW1 to select clear mode
LCD starts to flash
Press SW1 to clear the memory
Change mode to "Hr" or "Lr"
"Hr" or "Lr" is displayed
Press SW1 to change resolution
All manuals and user guides at all-guides.com
Clearing all the stored
Press the mode switch until CL appears on the LCD. Press
SW1 and after a beep the LCD starts to flash . Press SW1
again within 5 seconds and all
the picture counter are cleared.
Changing the picture resolution
Picture resolution may only be changed when the camera
memory is empty. If there are any pictures stored in your
camera, the memory must be cleared first. To change
resolution, press the mode switch until the resolution icon is
displayed. To select "Hr" or " Lr", press SW1. Then the
LCD shows the number of remaining pictures at the current
setting.
the camera memory and