Modify Menu; Laser Key Cut Menu; Flat Key Cut Menu - Keyline NINJA LASER Manual De Uso Y Mantenimiento

7.4.0

Modify menu

The MODIFY MENU is used to modify the cut parameters for a key and
it also makes it possible to personalise some characteristics of the
key, according to the client's specific requirements.
How to proceed:
• From the key search sub-menu, select "
• This displays the technical sheet for the selected article
and makes it possible to change some of the key charac-
teristics.
3 4 5 6 7 8
Options displayed:
1. With this button is possible to decode the selected key.
2. With this button is possible to insert the cuts directly.
3. With the Cut Type button is possible to select between
the possible cut types for the selected key. For Flat keys
cut types are: Normal, Laser and Plane.
Copyright by Keyline - Italy
MODIFY AND CUT
4. With the left arrow button is possible to scroll the spaces
moving to left direction.
5. With the right arrow button is possible to scroll the spac-
es moving to right direction.
6. With the minus button is possible to decrement the depth
of the highlighted tooth.
7. With the plus button is possible to increment the depth of
".
the highlighted tooth.
8. This makes it possible to select the depth increase or de-
crease rate when the + or - buttons are pressed. The availa-
ble options are: one STEP is either 0.1 mm or 0,01 mm, 1/2
STEP
9. With this button is possible to reset the modifications
made on the selected tooth.
10. With this button is possible to modify simultaneously all
the teeth.
• For further information select "
Note: The " " symbol makes it possible to save the selected
key in the list of bookmarks. See paragraph 6.2.0.
7.5.0

Laser key cut menu

1
Once the key to be copied has been searched using the relevant
functions in the Database menu, the programme will direct the
2
user to the CUT screen, that makes it possible to duplicate the
desired key.
9 10
4
NINJA LASER
Options displayed:
7.6.0
Once the key to be copied has been searched using the relevant
functions in the Database menu, the programme will direct the
" from the display.
user to the CUT screen, that makes it possible to duplicate the
desired key.
1
2
Options displayed:
5 6
3
Man. cod. B409927FG
1. With this button is possible to set the amount of copies
that need to be cut.
2. With this button is possible to save the key.
3. Starts the key cutting process.
4. Makes it possible to change the cutting speed. The avail-
able materials are: BRASS and CUSTOM.
5. Displays the Jaw that has to be used to cut the key.
6. Displays the type of stop to be used to cut the key.
• For further information select " " from the display.

Flat key cut menu

4 5 6 7 8 9
1. With this button is possible to set the amount of copies
that need to be cut.
2. With this button is possible to save the key.
3. Starts the key cutting process.
4. Makes it possible to change the cutting speed. The avail-
able materials are: BRASS, AlUMINIUM, STEEL, NIKEL
SILVER, CUSTOM.
Keyline S.p.A.
1
2
3
19