Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTRUCTIONS FOR 540ESC, 540ESSC, 540ESCM6 DIE GRINDERS
Read and understand "Safety Instructions For Air Tools" and these instructions before
AIR SUPPLY
The efficiency of the tool is dependent on the proper supply of clean dry air at 90 psig (6.2 bar). The use of a line filter, pressure regu-
lator, and lubricator will insure maximum output and life of tools. Before connecting tool, blow out the air line to remove water and dirt
which may have accumulated.
HOSE AND HOSE CONNECTIONS
Supply hose should be not less than 3/8" (10mm) I.D. Extension hoses should be at least 1/2" (13mm) I.D. Use couplings and fittings
with at least 3/8" (10mm) I.D.
LUBRICATION
Use SIOUX No. 288 air motor oil. An airline lubricator, set to deliver 2 to 3 drops per minute, is recommended. If a lubricator is not
used, add .08 oz. (2.4 cc, 24 to 30 drops) of oil into the air inlet every 2 to 3 hours.
GENERAL OPERATION
•
When using the tool in a vise or toolpost holder, use moderate pressure.
Refer to "Safety Guide for Sioux Abrasive Wheel" for abrasive wheel selection and safe operation.
•
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
January 1, 2004
Murphy, North Carolina, USA
Date and place of issues
SERIAL "B"
operating this tool.
INSTRUCTIONS FOR DIE GRINDERS
SOUND AND VIBRATION READINGS
*Sound Pressure
Catalog No.
dBA
540ESC
77.1
540ESSC
77.1
540ESCM6
77.1
*per PN8NTC1
DECLARATION OF CONFORMITY
540ESC, 540ESSC, 540ESCM6
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Gerald E. Seebeck
Sioux Tools Inc.
Name and position of issuer
1
*Sound Power
dBA
88.8
Less than 3.5
88.8
Less than 3.5
88.8
Less than 3.5
*per PN8NTC1
*per ISO 8662
President
Form ZCE674A
Date 2004January29/A
Page 1 of 8
*Vibration
m/s
2
Signature of issuer
Printed In U.S.A.
Tabla de contenido
Manuales relacionados para SIOUX 540ESC
Resumen de contenidos para SIOUX 540ESC
- Página 1 LUBRICATION Use SIOUX No. 288 air motor oil. An airline lubricator, set to deliver 2 to 3 drops per minute, is recommended. If a lubricator is not used, add .08 oz. (2.4 cc, 24 to 30 drops) of oil into the air inlet every 2 to 3 hours.
-
Página 2: Allgemeiner Betrieb
Verwenden Sie SIOUX Motoröl Nr. 288. Es wird eine Luftschlauch-Schmiervorrichtung empfohlen, die 2 bis 3 Tropfen pro Minute abgibt. Wenn keine Schmiervorrichtung eingesetzt wird, füllen Sie alle 2 bis 3 Stunden 2,4 ml (0,8 oz oder 24 bis 30 Tropfen) SIOUX Druckluftmotoröl Nr. -
Página 3: Lubricacion
LUBRICACION Use aceite para motor neumático SIOUX No. 288. Se recomienda un lubricador de tubo de aire que distribuya de 2 a 3 gotas por minuto. Si no se utiliza un lubricador, agregue 2,4 cc. (0,08 oz. de 24 a 30 gotas) de aceite en la toma de aire cada 2 ó 3 horas. -
Página 4: Uso Generale
PN8NTC1 ISO 8662 CERTIFICAZIONE DI CONFORMITA La Sioux Tools, Inc, con sede al 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, solennemente dichiara sotto la propria e sola responsabilità che i prodotti 540ESC, 540ESSC, 540ESCM6 sono conformi alle seguenti normative, standard o certificazioni:... -
Página 5: Lubrification
PN8NTC1 ISO8662 DÉCLARATION DE CONFORMITÉ La société Sioux Tools, Inc., située à : 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, affirme que les produits déclare sous sa seule responsabilité que les produits 540ESC, 540ESSC, 540ESCM6 dont cette fiche fait l’objet, sont conformes aux normes, documents normatifs et autres références :... - Página 6 SMERING Gebruik persluchtmotorolie SIOUX No. 288. Het is aanbevolen om een persluchtsmeersysteem te gebruiken en dit af te stellen op 2 tot 3 druppels smeervloeistof per minuut. Is dit niet mogelijk, dan moet er om de 2 tot 3 uur 0,08 oz (2,4 cc, 24 tot 30 druppels) olie in de luchtaanvoeropening gevoegd worden.
- Página 7 ISO 8662 FÖRSÄKRAN OM ÖVERENSSTÄMMELSE Vi, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, förklarar under eget ansvar att produkterna 540ESC, 540ESSC, 540ESCM6 som denna försäkran gäller uppfyller följande standard eller standarder eller andra normgivande dokument:...
- Página 8 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. WARNUNG Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw.
- Página 9 This pdf incorporates the following model numbers: 540ESC, 540ESSC, 540ESCM6...