Manuales relacionados para Adjust-A-Gate AG72
Resumen de contenidos para Adjust-A-Gate AG72
- Página 1 3“ Wood screws are not necessary for every hole. 3 “los tornillos de madera no son necesarios para cada agujero. (Use “K” self tapping screws) h board to gate Use to attac frame upright Uso de unir a tablero al montante del marco de la puerta revised 4/17/07...
- Página 2 Installing Post Hinges Installing Post Hinges The Adjust-A-Gate™ is made to swing in. With this in mind you will want Instalcion de las Bisagras del Poste to locate your wood post hinges toward the back edge of the gate post so the latch will work properly.
- Página 3 Step 3 Step Three Positioning Positioning Posicion a. Slide the other side of the Gate Frame (A) onto B1 & B2 Telescoping 1” Pieces. b. Swing the gate to the closed position and adjust the frame so that there is a 1” gap between the frame and the fence post. Paso Tres Posicion a.
- Página 4 If you have trouble stabilizing your boards at the El Adjuste Del Tensor outside edges of the Adjust-A-Gate™, you can use the 4 self-drilling screws (K) provided and attach the boards directly to the gate frame. B. By adjusting the turnbuckle on the truss cable you can fine tune the latch to give you that perfect fit.