Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3.5. Thermostat operating mode.
In the thermostat operating mode, the heater will heat, depending on the temperature setting and the
current room temperature.
To use the thermostat mode, simply press on the "+" or "-" keys of the remote control until you have
selected the desired room temperature. The set-point temperature will start to flash and the ST symbol
will light up.
The different power levels will be connected according to the difference between the set-point
temperature and the room temperature, in order to reach the desired comfort.
3.5.1. Weekly programming
It is possible to program a weekly heater's operation, setting the time periods on each day of the week
when the heater will operate, as well as the set-point temperature for each period. With that in mind, first
of all you should set the operating periods and, later, the set-point temperature on each day of the week.
A. Weekly periods programming
First of all, we shall program the time periods of each day of the week when the heater will operate.
-
Day of the Week. Click the "W-timer" button once and the
(Monday). By clicking "+" or "-", you can choose the day of the week that you want to program
(Mo= Monday...Su= Sunday, etc.)
-
Start heating time. Click the "W-timer" button again. The
programming).
o First of all, the hours will flash on the display. Click "+" or "-" to choose the time.
o Click the "W-timer" button again. The minutes will flash on the display. Click "+" or "-" to
choose the minutes of the start time.
-
End heating time. Click the "W-timer" button again. The
programming).
o First of all, the hours will flash on the display. Click "+" or "-" to choose the time.
o Click the "W-timer" button again. The minutes will flash on the display. Click "+" or "-" to
choose the minutes of the end time.
Repeat the task with the different days of the week to set the time heating program.
B. Temperature programming
Now we shall proceed to select the set-point temperatures required for each day of the week.
-
Click the "Delay" key. The
display.
-
Use the "+" or "-" buttons to select the desired temperature.
-
Click the "Delay" key again to confirm the temperature setting and move on to the next day of
the week
(Tu: Tuesday). Use the "+" or "-" buttons to select the desired temperature.
-
Repeat the previous process for the rest of the days of the week.
(Mo= Monday) will light up and the temperature will flash on the
10
light will start to flash
symbol will light up (start of
symbol will light up (end of
Tabla de contenido
