Facom Expert E201434 Manual De Instrucciones página 2

POCKET INSPECTION LAMP
1. HOOK
2. 3 SMD LED
3. Switch
4. COB LED
5. Charging socket
6. Magnetic
7. AC charger
8. USB cord charger
9. Charging indicator
SPECIFICATIONS
Charging time: 4-5 hours
Working time: 3-4 hours (2.5WCOB)
10 hours (3SMD)
Luminous Flux: 170Lm
3.7V 1800mAh lithium battery 3.7V 1800mAh lithium battery
Battery:
WARNING
This device uses a rechargeable Lithium ion battery that can rupture, ignite and cause series injury if misused.
Observe the following safety rules:
DO NOT place battery and device in fi re or high temperature
DO NOT tamper with battery wiring
DO NOT puncture or damage battery
DO NOT use battery that appears damaged
DO NOT immerse or expose battery to water
DO NOT alter or modify the battery
DO NOT attempt changing the battery in any manner other than that prescribed in this manual.
DO NOT dispose of the battery in fi re or water.
Failure to heed these warning may result in personal injury and/or property damage.
ASSEMBLY AND USE
1. Charging
Connect charger into charging socket, which is located on the side of worklight.
Connect the charger to a power supply.
The charging indicator will illuminate to show that charging has started.
NOTE: The charging indicator will turn green when the lamp is fully charged .
Disconnect the charger from the worklight when it has been charged for a suffi cient time.
2. Operating the Lamp
CAUTION: Never shine the LED light directly into your or anyone else's eyes.
www.expertbyfacom.com
1
2
3
4
5
6
9
8
7