Basic Operation; Connectivity Options; Connecting The Power Cable; Indicator Lights - Newskill ICARUS 27 Manual Del Usuario

5.Basic Operation

EN
1. Insert one end of the DP cable into your PC's graphics card. A HDMI cable
may also be used. A HDMI cables is not included.
2. Connect the other end of the cable to the corresponding connector on
your monitor.
3. Connect the power cable to your monitor then connect the other end to
your power source. It is recommended that you use a surge protector with
adequate voltage if a wall outlet cannot be reached directly.
4. Press the power button to turn on the monitor.

6. Connectivity Options

6.1 Connecting the Power Cable

Connect the included power cable to the power connector, and
then plug the other end into an wall outlet.
6.3 HDMI Connectivity
In order for the monitor to receive HDMI signals from the
comptuer, use the HDMI cable to connect the monitor to the
computer.

7. Indicator Lights

Solid blue light indicates power is on and the monitor is
operating normally. Flashing blue light indicates no video
source ,no horizontal or vertical signal has been detectde
or voltage is low. Please ensure your computer is on and all
video cables are fully inserted and/or connected.
10
ICARUS SERIES
Power Cable
HDMI Cable
(not included)
HDMI OUTPUT
DP Connector
6.2 Connecting Your Earphones
Plug in your earphones to receive audio signals from your
monitor. If your earphones are connected to the monitor and
audio devices are connected to your computer at the same time,
the audio devices will not produce sound. Earphones and other
audio devices are not included.
Headphones (Not included)
6.4 DP Connectivity
In order for the monitor to receive DP signals from the computer,
use the DP cable to connect the monitor to the computer.
DP OUTPUT
HDMI Connector
DP Cable (included)
Indicator light