Horizon Global 76420 Instrucciones De Instalación página 5

5. Install hitch A - Raise hitch into position and insert fasteners. Starting on
the driver side, insert items 1 & 2 and tighten using ¾ socket. On the
passenger side, insert items 4 & 5 and tighten using 19mm socket. Insert
items through both the hitch bracket(s) and vehicle frame as shown in
Figure 1 for support.
7. Torque fasteners - Tighten M10 CL10.9 fasteners with torque wrench
to 40 Lb.-Ft. (54 N*M), both 1/2 GR5 fasteners with torque wrench to 75
Lb.-Ft. (102 N*M) and M12 GR 8.8 fasteners with torque wrench to 68
Lb.-Ft. (92 N*M).
©2020, 2021 Horizon Global™ Corp - Printed in Mexico
6. Install hitch B – Bottom side, using a 16mm socket insert items 7 & 8
through hitch bracket and into the vehicle frame welds nuts as shown in
Figure 1 (Hand tighten). NOTE: It may be necessary to clean
debris/corrosion from existing weldnuts in frame using a wire brush.
Install remaining items 2,3 &6 onto matching bolts.
8. Raise exhaust/spare tire/ trim panel – reinstall exhaust and trim panel.
Raise the spare tire back into position. Note: when spare tire is being
raised back into position push it forward to provide additional clearance
from hitch.
Sheet 5 of 15 76420NP 6-8-21 Rev. C