Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The battery bank comprises multiple batteries and a sophisticated BMS designed to prevent hazards resulting from specific failures. However,
the absolute safety if the battery is mishandled cannot be guaranteed.
If a user happens to be exposed to internal materials of the battery cell due to damage on the outer casing, the following actions are
recommended:
- Inhalation: leave the contaminated area immediately and seek medical attention.
- Eye contact: rinse your eyes with running water for 15 minutes and seek medical attention.
- Ingestion:
induce vomiting and seek medical attention.
If a fire breaks out in the place where the battery pack is installed, perform the following countermeasures:
Fire extinguishing media:
- A respirator is not required for normal operations.
- Use FM-200 o CO2 extinguisher.
- If fire occurs when charging the battery and if it is safe to do so, power off the switch.
- If the battery pack is not on fire yet, extinguish the fire before the battery pack catches fire.
- If the battery pack is on fire, do not try to extinguish it but evacuate people immediately.
Effective ways to deal with accidents
- On land: place damaged battery into a segregated place and call the local fire department.
- In water: stay out of the water and do not touch anything if any part of the battery, inverter, or wiring is submerged.
This guide and the tasks and procedures described in it are intended for use by skilled workers only. A skilled worker is defined as a trained and
qualified electrician or installer who has all the following skills and experience:
- Knowledge of the functional principles and the operation of on-grid and off-grid (backup) systems.
- Knowledge of the dangers and risks associated with installing and using electrical devices and acceptable mitigation methods.
- Knowledge of the installation of electrical devices.
- Knowledge of all safety precautions and best practices related to solar PV installations
PRODUCT INTRODUCTION
This battery system is a high-tech researched and developed product by Inti. With its integration, miniaturization, light-weight, intelligent
centralized monitoring, battery maintenance and management, energy conservation and environmental protection, this battery system can be
widely applied in remote access network equipment, remote switch units, mobile communication, transmission equipment, home storage and
other areas as a backup power supply.
-The battery adopts LiFePO4 as cathode material; the life cycle of LiFePO4 cells can reach up to 4000 times RT 80% DOD, 5000 times RT
60%DOD.
-The system adopts high performance BMS battery management module. The BMS has the function of protection in current, voltage and
temperature, also enables communication between battery and main equipment.
-The monitoring unit will automatically measure the battery charging and discharging current, the charging or discharging voltage, the surface
temperature of a single cell.
-Shutdown function. An alarm will turn on if the battery voltage is lower than the set alarm value, when the voltage is too low, it will protect the
battery by automatically shutting down the equipment.
-The system has good electromagnetic compatibility.
-Simple and flexible installation: internal.
-High quality magnesium aluminum alloy, anti-corrosion, substantial, durable and practical.
-Useful life greater than 12 years.
-Dustproof design, safe and reliable DC output.
15
MANUAL DE USUARIO BATERÍA SAUCO / BATTERY SAUCO USER MANUAL
Make sure all the power is off and the wires are disconnected while
doing maintenance of the battery.
www.intipv.com
Tabla de contenido
