Changing Channels; Channel Scan; Button Lock; Call Tones - Esscom TWINTALKER 1302 Manual De Usuario

ESSCOM TWINTALKER 1302 DUO COMBI PACK

14.5 CHANGING CHANNELS

The PMR has 8 available channels.
To change channels:
• Press
SC
• Press
• Press
PTT
TX RX
NOTE: Any PMR set on the same channel can receive and listen to the conversation.
14.6 MONITOR
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press button for normal monitoring .
• Press and hold . After 5 seconds you can release the button. You are now continuous monitoring the channel
until you press again.

14.7 CHANNEL SCAN

CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
• Press and hold
• Release the buttons.The channel on the display changes as it scans through the channels.
SC
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear the
active signal.
TX RX
• When an active signal (one of 8 channels) is detected, press
and continue to search for another active channel
• Press
PTT
scan.
14.8

BUTTON LOCK

• Press and hold
SC
LOCK icon is displayed on the LCD Screen.
• Press and hold
TX RX

14.9 CALL TONES

A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press
SC
• Press
• Press TX RX PTT
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
16
once, the current channel number flashes on the LCD Screen.
or to change the channel.
to confirm the channel selection and return to NORMAL mode.
and for 2 seconds.
to communicate through the active signal channel or press
for 2 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON
again to deactivate BUTTON LOCK
2 times. CA will be displayed.
or to select another call tone or select OF to enable call tones.
to confirm your selection and return to the standby mode.
or to bypass the current channel
to deactivate channel
ESSCOM TWINTALKER 1302 DUO COMBI PACK