Manual Mode - Heath Zenith DualBrite Manual Del Usuario

The detector is less sensitive to motion di-
rectly towards it and more sensitive to across
motion.
Motion
Sensor
Least Sensitive
❒ Walk through the coverage area noting
where you are when the lights turn on.
Move the sensor head left or right to
change the coverage area.
Note: Grasp the sensor
only as shown and turn
the entire sensor. Any
other method may
damage the sensor.
Do not force it past
the stops.
❒ If you need to change the sensitivity,
temporarily remove the fixture and make
the adjustment. Too much sensitivity may
increase false triggering.
❒ Set the amount of TIME you want the
light to stay on after motion is detected.
(1, 5, or 10 minutes).
❒ Set the amount of time after dusk you
want the lights on accent level.
All manuals and user guides at all-guides.com
Motion
Most Sensitive
240°
Sensor Aiming
Adjustment Angle
SPECIFICATIONS
Range . . . . . . . . . . . Up to 30 ft. (9.1 m)
Sensing Angle . . . . . Up to 150°
Electrical Load . . . . . U p t o 1 0 0 Wa t t
Sensor Capacity . . . Up to 360 Watts (3.0 A.)
Power Requirements 120 VAC, 60 Hz
Operating Modes . . . TEST, AUTO, and
Time Delay . . . . . . . 1, 5, 10 minutes
D B Timer . . . Off, 3, 6 hours, dusk-to
®
ual rite
HeathCo LLC reserves the right to discontinue
products and to change specifications at
any time without incurring any obligation
to incorporate new features in products
previously sold.
6
[varies with surrounding
temperature]
Maximum Tungsten
Incandescent
Maximum Tungsten
Incandescent

MANUAL MODE

dawn
598-1207-01