Bluetooth Connection - Turbosound iP Serie Guia De Inicio Rapido

10 iP series
iP DSP Menu Structure
Menu Sub-Menu
MAIN MENU (Page 1)
MAIN MENU (Page 2)
*iPhone and iPad are trademarks of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks is under license. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the
United States and/or other countries.
iP Series Analogue Connection
Despite their sophistication, iP speakers offer straightforward analogue connectivity, and you can easily
arrange the iP system to allow simple control of levels from other devices, such as mixers. You can also
daisy-chain multiple iP speakers using only the analogue connections, and then directly control the overall
level from your mixer's master fader.
For example, you have four iP speakers and a mixer with simple left-right stereo outputs. For typical
operation, set the DSP volume and input gain settings on all speakers to a fl at "0 dB" setting. Connect the
mixer's left and right stereo outputs to the fi rst two speakers' analogue INPUT A connections (the left and
right mixer outputs will go to separate speakers). Then, run cables from the OUTPUT analogue connections
to the remaining two speakers. In a similar way, subwoofers can also be linked to the analogue OUTPUT.
Fullrange Function
Displays level indicators and model name.
Rotate the encoder knob to adjust the
output volume.
Press the encoder knob to enter the
main menu.
Displays the following Bluetooth*
status information:
Main Screen • •
Bluetooth symbol indicates
connection to audio and remote
control device (iPhone, etc.)
• •
"M" or "S" below the Bluetooth
symbol indicate that the speaker
is linked to another iP speaker as
MASTER (left channel, "M") or SLAVE
(right channel, "S").
Rotate the encoder to change the
Volume
output volume.
Sets input mixer gain for analogue input A
INPUT
and B, as well as Bluetooth.
Sets front logo illumination, LCD back
SETUP panel contrast, device lock and
master reset.
Lets you pair the speaker with mobile
BT Bluetooth devices and link to another
iP speaker as MASTER/SLAVE.
Selects from 4 preset equalisations,
MODE
depending on function and music type.
POSIT. Selects DSP compensation depending on
(Position) the speaker position: stand, wall or fl oor.
Allows adjustment of bass and treble
control, high pass fi lter for use with a
EQ
subwoofer, and applies phase inversion to
the output, if required.
INFO Displays model and fi rmware information.
EXIT Returns to main screen.
iP Series Bluetooth Instructions

Bluetooth Connection

To play audio from a Bluetooth-enabled device, you will need at least one iP speaker and an iPad*/
iPhone*/Android*/Windows* device with basic Bluetooth connectivity. With a basic Bluetooth connection,
all related iP DSP functions must still be controlled directly from the iP rear panel via the rotary encoder.
For Apple iOS devices, you can also download a dedicated TURBOSOUND iP Bluetooth app from the
Apple App Store. This iP Bluetooth app allows you to control a single or stereo pair of iP speakers,
including all DSP functions, remotely from your iOS device (see "Bluetooth Control" below for
more information).
Bluetooth Streaming
To Stream Bluetooth Audio with Any Bluetooth Device (iPad/iPhone/Android/Windows, etc.)
Mono operation
1. Enable Bluetooth on your remote device.
2. Switch on your iP speaker and minimize the volume.
3. Select "Pair device" from the SLAVE speaker's Bluetooth menu.
4. Check that your remote device is searching for a connection.
5. Once your device detects the iP speaker, select the iP speaker from your remote device's menu
(e.g., "TURBOSOUND iP12").
6. Wait until the remote device shows an active connection, and then check the speaker's Bluetooth menu,
which should display the name of the remote device (e.g., "Coolpad8150").
7. Bluetooth music can now be streamed to your iP speaker. The stereo signal will automatically mix down
to mono.
8. The iP speaker will display the Bluetooth indicator on the main, top-level DSP screen.
Stereo operation
1. Complete the steps above to connect the fi rst speaker to Bluetooth audio.
2. The fi rst connected speaker automatically becomes the MASTER speaker.
3. Switch on the second speaker, which becomes the SLAVE speaker.
4. Select "Link speaker" from the SLAVE speaker's Bluetooth menu.
Quick Start Guide 11