Usage - SISTEMA TR2 Manual De Producto

OK
The safety button on the handgun prevents
inadvertent starting on of the unit.
MEDIUM
MIN

uSage

NOZZLE CLEANING if the water jet is irregular during the operation
or the thermic safety switch shuts off the machine, the nozzle is likely
to be blocked. Proceed as follows:
1) Turn the starting switch to the "OFF" position;
2) Remove plug from power socket;
WARNING
High pressure can cause serious injury.
Keep spray head well clear of the face, other people, animals or
plants. Protective clothing and goggles must be worn during use.
3) Remove the lance from the gun;
4) Clean the opening with the suitable instrument
(diameter < 0.04 in. = 1 mm.); Wire tool included.
5) Perform a visual check through the nozzle to see if all obstructions
are removed.
For proper unit operation the pressure washer
NO
must be used in the vertical position.
When using detergent applicator,
use only detergents formulated
for pressure washers.
The output water pressure is adjustable and it is
MAX
controlled by the pressure regulation lever.
Turn the lever upward to decrease pressure or
downward to increase pressure.
The output pressure is indicated on the scale.
TURBO NOZZLE Use turbo nozzle or adjust the jet nozzle to increase the
washing effect (the turbo lance is not adjustable).
Caution: Do not move the Adjustable Lance very close to a painted surface at a
90° angle and adjust the nozzle to a pinpoint spray. Hold the lance at a distance of
12 to 15 inches and aim the nozzle at a 45° angle to the surface level. Significant
damage may occur to the painted surface if appropriate care is not observed.
- 6 -