REMOVU M1 Manual Del Usuario página 6

5. Pairing the Device
1. Pairing A1 to M1
- Turn on the A1, and long-press the pairing button.
- Turn on the M1, and long-press the pairing button.
- When the devices are paired, the LED indicators on both devices
will turn blue.
2. Pairing A1 with other Bluetooth microphones (headsets).
- Turn on the A1, and long-press the pairing button.
- Turn on the power of the device you are trying to use with A1
and activate the pairing mode of the device.
- When the devices are paired, the LED indicator will turn blue.
6. To Record
1. When the devices are successfully connected, and A1 and its
connector are plugged in correctly, the camera will record the
sound received from the M1 to the video.
2. Switching Microphones: If you want to switch from M1 to GoPro
internal microphone
- While A1 is connected to the GoPro, turn off pairing mode by
turning the power off of A1 to use the internal microphone of
GoPro. Turn the power on to use M1 again.
- Turn off the power of M1 to disconnect the device. Then the
internal microphone of GoPro get activated.
7. Audio Amplification Mode
This mode is used when M1 is being used in the waterproof housing
case. It amplifies the sound recorded through M1.
How to Activate
1. While the devices are paired, press the pairing button on A1 once
shortly.
2. When you see both red and blue LED lit at the same time, it means
you have succesffully activated the audio amplification mode.
3. To deactivate, press the pairing button on A1 twice.
6