1.3 Turning the unit ON/Off
TO TURN ON:
Hold down the MFB button for approx . 3 seconds . The spe-
aker will emit a tone and the LED will begin to flash quickly
for approx . 3 seconds .
Afterwards, the unit will be in the stand-by mode and the
LED will flash approx . every 5 seconds .
TO TURN OFF:
Hold down the MFB button . The speaker will emit a long
tone and the LED will flash red before turning off .
2 pAIRING THE INTERpHONE CAR KIT wITH AN INTER-
pHONE f4
If you have an INTERPHONE CAR KIT and an INTERPHONE F4
module, you can connect the two together in the Intercom
mode .
After turning the two devices off, hold down the MFB button
(for approx . 8 seconds) until the LED flashes blue and red in
alternating fashion .
When both LEDs flash blue and red in alternating fashion,
briefly press the MFB button on the INTERPHONE CAR KIT .
After about 15 seconds, the LEDs on both modules will turn
on with a steady blue light, which shows that the connection
has been established and that Intercom communication has
been activated automatically .
2.1 Using the Intercom
To activate the Intercom function: To activate Intercom
conversation, press the MFB button on either of the two IN-
TERpHONE CAR KIT modules for around 3 seconds . A tone
will be emitted when the connection is established .
Conversation in the Intercom mode is full duplex .
To deactivate the Intercom function: To deactivate the In-
tercom function, briefly press the MFB button .
To adjust the volume: To adjust the volume, press the Vo-
lume + or Volume - buttons until the desired volume level
is reached .
To activate the Mute mode: You can disable the micro-
phone (MUTE mode) by pressing the Volume – button for
around 3 seconds (a tone will sound when the microphone is
deactivated) . When the system is in the MUTE mode, the LED
will flash intermittently and a tone will be emitted every 8
seconds to remind you that the device is in the MUTE mode .
To deactivate the Mute mode: To deactivate the MUTE
mode, press the Volume + button for around 3 seconds (a
tone will be emitted when the microphone is deactivated) .
The INTERpHONE CAR KIT features handset/hands-free
profiles for connecting to a mobile phone through a
bluetooth connection.
3 pAIRING THE INTERpHONE CAR KIT wITH A MObILE
pHONE
After turning off the INTERpHONE CAR KIT, hold the MFB
button down (for approx . 8 seconds) until the LED flashes
blue and red in alternating fashion .
When the LED flashes blue and red in alternating fashion,
search for devices from the phone (see the mobile phone
manual for instructions) .
When the phone detects the INTERpHONE CAR KIT, select it
and enter number code 0000 .
3.1 Operation
Answering a call: The speaker will emit a warning tone or
ring tone to signal an incoming call . To answer the call, brie-
fly press the MFB button .
Ending a call: To end a call, briefly press the MFB button .
Voice-activated dialling: On some mobile phones, you can
place a voice-activated call by pressing the MFB button briefly .
Refusing a call: To refuse an incoming call, hold down the
MFB button for around 4 seconds .
Adjusting the volume: To adjust the volume, press the Vo-
lume + or Volume - buttons until the desired volume level
is reached .
4 bLUETOOTH® SpECIfICATIONS
bluetooth®:
v2 .1 EDR
Supported profiles:
Headset – Hands-free – A2DP / AVRCP
pairing:
up to 8 devices
IT
EN
FR
ES
DE
PT