Cleaning And Maintenance - Aigostar 30KDF Manual De Instrucciones

III. Only heating separately, without frothing.
1. Place the appliance on a flat surface.
2. Select mixing paddle according to your task. Then open the lid, insert th
mixing paddle onto the shaft on the bottom of jar.
3. Fill the jar with the desired amount of milk(the initial temperature of milk is
5-10°C), and replace the lid.
NOTE: the max milk quantity permitted to add is 200ml, to avoid milk
overflowing after mixing or frothing.
4. Place the jar on the power base and connect the plug into a power outlet.
The indicator will illuminate red.
5. Press the switch button once, the indicator will light blue. Then the appliance
will start to work. Once the temperature of milk has achieved about 65±10℃ ,
the heating element will stop heating and the mixing
automatically; the indicator will illuminate red again until unplugging the power
outlet.
Note: The rotation of mixing paddle is only used for avoiding sticking. It will
not froth the milk.
6. When the appliance has stopped operating, open the lid, pour out the
warm milk and enjoy it.
Caution: Minimum 3 minutes rest time must be maintained between two
continuous cycles, otherwise, the appliance will enter self-protection state
automatically after working for 5 cycles continuously, the indicator will be
illuminated blue and flash, the switch button will not be activated, after about
5 minutes, the appliance will enter standby state and you can
continue operating the appliance.
7. Always turn off the milk frother and disconnect the power supply when
not use.

CLEANING AND MAINTENANCE

Always disconnect the appliance from the power outlet and allow it cooling
down before cleaning.
CAUTION: Never immerse the jar, power base in water, or allow moisture to
contact with these parts.
1. Wash lid with water and mild detergent. The lid is not dishwasher safe
component. Rinse thoroughly and dry.
2. Remove the mixing paddle or frothing paddle, and wash them completely
in warm water.
7
e
paddle will stop rotating
3. Wash the inner of jar with a combination of a mild detergent and water
and then wipe clean with a soft damp cloth.
4. Wipe the appearance of jar with a soft damp cloth or cleaner, never use
a poisonous cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the appliance to prevent the gloss loss.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working
electrical equipment to an appropriate
waste disposal center.
WARRANTY: 2 YEARS
8