Trouble Shooting; Recording Time Table - D-Teg CX1000 Manual De Instrucciones

Trouble Shooting

CX1000 does not power on
Check if the power is plugged in securely on both ends. If it is, take the micro
SD card out and reboot. If CX1000 powers on without the micro SD card,
there is a problem with the storage media and needs to be reformatted or
renewed.
Alarm is ringing
If the micro SD card is not securely plugged in or is damaged, the alarm will
go off and the red LED will blink.
1. Check if the micro SD card is working properly
2. Reformat the storage media using the PC Viewer
3. Check if the micro SD card is securely plugged
WARNING
When reformatting the micro SD card, all data will be deleted, please back
up all important data before proceeding.
How to reformat the micro SD card
1. Launch the PC Viewer
2. Click the "Init SD"
3. Select the micro SD card drive
4. Follow the on screen instructions
NOTE
If an error message pops up, re-plug in the micro SD card and try formatting
again. If it still does not work after several tries, there maybe a problem with
the micro SD card, please contact your seller
Playback is not smooth
The smoothness of the data playback depends on the recorded frame rate
and in some cases, your PC's performance. If the playback seems rough, try
selecting fewer files to playback. Also, once converted into an AVI file the
playback may become smoother.
18
icon

Recording Time Table

Micro SD card (in minutes)
Resolution FPS
4GB
30 57
1080P HD 10 73
Parking Mode 228
30 47
1080P 10 85
Parking Mode 310
30 72
720P 10 163
Parking Mode 427 1,280
30 213
VGA 10 245
Parking Mode 1,138 3,413
NOTE
This table is for reference only and may differ depending on
configuration and use.
8GB 16GB 32GB
123 257 523
218 508 1,089
683 1,593 3,413
142 332 711
256 597 1,280
931 2,172 4,655
215 502 1,076
488 1,138 2,438
2,987 6,400
640 1,493 3,200
735 1,716 3,677
7,964 17,067
E
19