BOTTOM CAVITY
Upper Grill.
Toasting and browning.
Dual Grill.
Suitable
for
grilling.
Meat,
fish
vegetables. Suitable for pizzas, following the
cooking table in the maintenance handbook. It
can also toast bread. For toasting we
recommend using this function without the
drip tray.
IMPORTANT
The electronic timer can programme cooking
only for the upper oven, not the lower.
Setting the Electronic Timer
The oven works only when the clock has been
adjusted.
Before using for the first time and after power
cuts or unplugging, the clock must be set. If
the clock is not set it will flash "0.00".
– Set the time with + and – . After about 3
seconds the clock will stop flashing.
The electric clock offers an alarm and several
oven timer settings: you can use it to set the
length and switch-off time of cooking. All the
timer settings are possible in any service
mode and at any temperature.
3
1
2
12
Lower grill
Heat only comes from beneath. Suitable for
warming plates and defrosting food at low
temperatures. For this function do not remove
the drip tray.
and
Oven Use
Readout:
1 Hour, short time (current time in each case).
2 Lights, indicating the oven is on.
3 Lights, for each selection/setting key?
Selection keys:
Cooking length.
End of cooking time.
Alarm.
Adjustment:
+/– to change the values of all the settings.
Setting the clock to the right time
• Press
and
together until the time
flashes on the display.
• It can be changed with
+/– .
• Wait until the display stops flashing. The
time has been set, and the dot between the
hours and minutes blinks once a second.
Set the alarm
The alarm can be used independently of the
switching functions.
• Press
. The light will
blink. "0.00" will appear
on the display.
• Set the desired time in
minutes and seconds by
+/ – .
• Start the alarm with
or wait for the light to stop blinking. You will
then see on the display the time left until
the alarm sounds.
After the time has passed you will hear a
signal.
• Press any key and the signal will stop. The
current time will appear on the display
again.
How to set the clock timer functions
1 Setting the function:
Press the key to select the function you want
to use. The light above the key will start to
blink and a value will appear on the display.
2 Change/set the function:
Change the value with + and – .
3 Starting the function:
If no key is pressed during 3 seconds, the
function will start and its light will stay on.
• Pressing a selection key makes this
quicker.
– The previously chosen selection key
confirms the setting and starts the
function.
– Another selection key confirms the entry
and selects the new function.
Changing a setting
If you want to change a value which is already
set (even while the function is already on),
press the corresponding selection key again
and change the setting with +/–.
When cooking has finished
The oven turns itself off
and the display shows
"End". You will hear a
signal. The two lights next
to the display will stop
blinking.
• Press any key and the signal will stop. The
display will now show the current time. The
oven will turn on again.
• Turn the temperature setting and functions
to "0".
Setting cooking time
(turn-off setting)
The oven will turn itself off after the set time.
• Press
, the light will
blink and "0.00" will
appear on the display.
• Set the desired cooking
time in minutes and
seconds by +/ – .
After about 3 seconds the
clock starts. The light will
come on and stay on. The
display will show the time
remaining. The two lights
next to the display will blink alternately.
• Set the temperature and cooking setting.
Changing the end of cooking time
(turn-off setting)
Use this setting when you want the oven to
turn off automatically at a certain time.
• Press
, the light will
blink and the current time
will be displayed.
• Set the time to stop
cooking with +/– .
After about 3 seconds the
clock starts. The light will
come on and stay on. The
display shows the time left
before cooking stops. The
two lights next to the
display will blink alternately.
• Set the temperature and cooking setting.
13