Using Your Induction Hob - Kenwood IH470 Serie Manual De Instrucciones

before using your induction
hob for the first time
Wipe over the hob plate see 'care &
cleaning'.
key
A hob plate
B pan guide
C control knob
D on/standby button
E menu/set button
F menu/time increase button
G LED display
H menu/time decrease button
I
time button
J turbo button

using your induction hob

Note : the buttons on the hob are
temperature-touch sensitive; they are
operated by placing the pad of the finger
on them. Do not tap with finger nail.
1 Plug in the induction hob. The
appliance will beep once, the LED
display flashes and shows "00:00".
The on/standby indicator light will
flash. The appliance is now in
standby mode.
2 Press the on/standby button D ,the
button will light and the LED display
G will read - - - - . The appliance is
now in standby ready for heating.
3 Place the pan centrally onto the
induction hob, within the pan guide
shown by the graphic on the hob plate
B .
Note : the power level or
temperature and the cooking time
can be adjusted using either the
control knob C or the increase /
decrease ( + / - ) buttons F and H.
To use the control knob, push it in
until it clicks and then release C.
It can then be turned clockwise to
increase or anticlockwise to
decrease. Note : releasing the
control knob turns the hob on in
the same way as point 2 above.
If the hob is turned on but no pot is
placed on it, the hob will change to
standby mode after 1 minute.
4 Select the desired menu setting with
the menu / set button E
Power - press 'menu/set' once and
the default power level of 1600 watts
is selected, the display shows '1600'
and the power indicator light is on.
The normal power range is from 120w
to 2000w in the following steps :
120w - 300w - 500w - 800w - 1000w
- 1200w - 1400w - 1600w - 1800w
- 2000w
Increase or decrease to the desired
power
Cooking will start. If no other button
is pressed, cooking will continue for
2 hours and will then automatically
change to standby mode.
Temperature - press 'menu/set'
twice and the default temperature of
140°C is selected, the display shows
'140' and the temp. indicator light is
on. The temperature range is 60°C to
240°C in steps of 20°C; increase or
decrease to the desired temperature.
Cooking will start. If no other button is
pressed, cooking will continue for 2
hours and will then automatically
change to standby mode.
Keep warm - press 'menu/set' three
times and the induction hob will be at
keep warm setting and the keep warm
indicator light is on.
Keep warm is at around 60°C ; the
display is " ----". If no other button is
pressed, the hob will stay at keep warm
for 2 hours and then automatically
change to standby mode.
5 Cooking time.
The hob can be set to cook for a fixed
time. After selecting the menu as
above, press the "time" button; the
display will flash "0:00" four times and
the time indicator light will be on. Turn
the control knob or press the + / -
buttons to select the desired cooking
time. Holding the finger on the buttons
will increase / decrease the time in
steps of 10 minutes.
4