Setup; Setup Menu; General Settings - Xoro HBD 1000 Manual De Usuario

SETUP

Setup Menu

Press the SETUP button to display the setup menu. It contains following options:
General Setting, HDMI Setting and System Information.
Make selection with the arrow button on the main menu and confirm with OK.
Make selection with the arrow button on the sub menu and confirm with OK.
Select settings on the sub menu with the arrow buttons 3/4/5/6 and confirm with OK.
Press RETURN to go back to the previous menu.
Press SETUP to quit the menu.
Note:
•
Depending on the mode of the player, some items might not be active.
General Setting
You can set System, Language, Playback, Security and Network unter the
General Setting.
System
Screen Saver
If it is on, a "Screen Saver" will be displayed after 3 minutes without any
interaction. If there is no further interaction for more than 6 minutes, the player will be switched to
Low Power Mode.
Select off to deactivate this function.
Disc Auto Playback
If it is on, the player will start automatically the playback as soon as a disc has been loaded.
Select off to deactivate this function.
Load Default
Select with the arrow buttons OK to load default, and Cancel to quit
the dialogue window.
Default settings will be restored if OK is chosen. Your changes on the settings will be erased.
Upgrade
You can have the update firmware carried by a disc, a USB device or
a SD card. Make here the corresponding selection.
BUDA
BUDA Information
You can have the BD-J disc's BUDA/BD Live information saved on a USB storage. If you click Fmt Buda, the information on this USB storage will be deleted to release space.
BUDA Setup
You can choose to take either a USB storage or a SD card as BUDA memory.
ENG-25