Duracraft Kidz Kolorz DFS-211N Manual Del Proprietário página 4

035-02050-000_R0 DFS-211 OM EFS
OPERATION
• Place your fan on a level and dry surface.
• Plug the power cord into a 120 volt wall outlet.
• To operate the Child Resistant switch, push in and turn the Speed Control Knob
(Fig. 10).
• To stop the oscillating feature, pull up hard on the Oscillation Control Knob. You will
feel two clicks before oscillation stops (Fig. 11).
• To re-start oscillation push down on oscillation knob.
Fig. 10
PUSH
IN AND
TURN
CLEANING AND STORAGE
• Turn the fan to the OFF position and unplug the fan before cleaning.
• Remove the Front Grille.
• Unscrew the Blade Knob by turning it CLOCKWISE.
• Pull the Fan Blade away from the Motor Housing.
• Clean the Fan Blade and grilles with a soft, damp cloth.
• DO NOT immerse the fan in water and never allow water to enter the Motor Housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• To store, disassemble and clean the fan carefully as instructed and store it in its
original box. You may leave the fan assembled and covered to protect it from dust.
Store the fan in a cool, dry place.
CONSUMER RELATIONS
Mail questions or comments to:
Kaz Home Environment
Consumer Relations Dept.
250 Turnpike Road
Southborough, MA 01772
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE RETURN THE FAN TO THE
ORIGINAL PLACE OF PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT
TO OPEN THE MOTOR HOUSING YOURSELF. DOING SO MAY VOID YOUR
WARRANTY AND CAUSE DAMAGE TO THE FAN OR PERSONAL INJURY.
12/1/03 10:58 AM
Fig. 11
OSCILLATION
CONTROL KNOB
Call us toll-free at: 1-800-554-4558
E-mail: [email protected]
Or visit our website at: www.kaz.com
Please be sure to specify model
number.
Page 4