Led Definitions - Motorola Symbol LS7808 Guía Rápida De Referencia

10

LED Definitions

In addition to beeper sequences, the scanner communicates with the
user via an LED display. The Standard LED Definitions table defines LED
indications that display during scanning.
Off
Green
Momentary flash
Slow continuous red flashing, green on
Fast continuous red flashing, green on
Green on (and laser blinking)
Red and green on
Maintenance
Cleaning the exit window is the only maintenance required. A dirty or
scratched window may affect scanning activity.
Remove any dirt particles with a damp cloth.
-
Wipe the window with a tissue moistened with ammonia or water.
-
To clean the exit window:
Insert a coin into the large screw heads on the front of the scanner
1.
and turn counter-clockwise.
Lift off the window.
2.
Wipe clean the underside of the upper window.
3.
Wipe clean the top surface of the lower window.
4.
Re-install the top cover by tightening the two large screws.
5.
To change the exit window:
Remove the window as described above.
1.
Replace with a new window.
2.
Reinstall the top cover by tightening the two large screws.
3.
LED
Symbol LS7808 Horizontal Slot Scanner
No power is applied to the scanner.
The scanner is on and ready to scan.
A bar code was successfully decoded.
The scanner is in programming mode.
There is an internal problem; the laser
is shut off for regulatory reasons.
Scanner is in low power blink mode.
Scanner is in low power (sleep) mode
and laser shutdown mode.
Indication