Automatic Shut-Off - Philips Wardrobe Care GC9950 Manual Del Usuario

3 Pull out the rinse tray.
4 Empty the water into the sink.
The rinse tray overflows if you do not empty it before the next Auto
Calc Clean session.
5 Slide the rinse tray back into the appliance.
The appliance stops beeping and the red light goes out.
,
6 The 'iron ready' light starts flashing to indicate that the appliance is
heating up.
After approximately 2 minutes, the 'iron ready' light stops flashing to
,
indicate that the appliance is ready for use again.

automatic shut-off

- This appliance is equipped with an automatic shut-off function. When
the steam trigger is not used for more than 10 minutes, the appliance
automatically shuts off and goes into the standby mode. You hear a few
beeps and the 'iron ready' light goes out.
1 To deactivate the automatic shut-off function, press the iron power-
on button once.
EnGlish
13