Tabla de contenido
Electrical Installation
Introduction
The actuator and a controller combine to provide a complete motion control system. The electrical to
mechanical power conversion and position feedback devices are contained in the actuator.
Connections to the actuator are made via the ¾" NPT ports. Normally one port is used to provide
access to the power wiring of the motor phases, the other port used to provide access to the resolver
feedback wiring.
¾" NPT Ports
EL100 Installation & Safety Manual
PN 48964
Revision E
36
External Ground
Lug Location
Cover Bolts (14)
Terminal Block
Housing Cover
Terminal Blocks
Terminal Block
Housing
1/9/14
Exlar Corporation
952-500-6200
Tabla de contenido
