Taurus Alpatec AGADIR CONNECT 1500 Manual De Instrucciones página 7

SET UP:
- Download the Taurus Connect App form the
App Store or Google Play.
- Sign up using your email address and pass-
word.
- Confirm the registration using the verification
code that will be sent to your email account.
- Create your home, name it, establish the geo-
graphical location and select the room where
you are going to place this smart appliance.
- Add Agadir Connect by following the steps
described in THE QUICK GUIDE.
IMPORTANT
- The device only supports 2.4GHz Wi-Fi net-
work.
- If the connection fails again, check the follo-
wing possible causes.
- Agadir Connect is too far away from the router.
- The Wi-Fi password is incorrect.
- The Wi-Fi network is not 2.4GHz
USE:
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- Power the appliance on, by using the on/off
button (D).
- Then, press the standby button (C) to start
using the radiator.
TEMPERATURE SETTING:
- Turn the temperature button (B) clockwise to
increase the temperature and anticlockwise to
decrease it.
- The adjustable range is from 5ºC to 35ºC.
ANTI-FROST MODE:
- When the target temperature is 5ºC, turn the
temperature button (B) anticlockwise. The
screen will display "Fr".
- It will maintain the temperature of the room
above freezing temperatures.
HEATING POWER SETTING:
- When the radiator is on, press the power
button (B) one time. The display will show H1,
H2, or H3.
- To change the power, turn the power button
(B).
- The radiator will operate at the following
powers:
Model H1
Agadir
600W
Connect
1500
Agadir
800W
Connect
2000
Agadir
1000W
Connect
2500
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off using the on/off button.
- Let the appliance cool.
- Unplug the appliance from the mains.
- Clean the appliance.
CARRY HANDLE:
- This appliance has a handle on the back to
make it easy and convenient to transport.
ANTI-TIPPING SAFETY DEVICE:
- The appliance has an anti-tipping safety device
that turns it off if the working position is not the
correct one.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
H2 H3
900W 1500W
1200W 2000W
1500W 2500W