Trust 18502 Guía De Instalación Rápida página 4

Bluetooth Audio Speaker - USER'S MANUAL
Installation
A On/ Off switch
1
B USB power input
C 3.5mm Audio input
D LED indicator: Blue/Red flashing
Red constant
Blue constant
E Previous
F Next
G Volume +
H Volume -
I Play, Pause/ Call pickup/ Bluetooth pairing
J Standby/ audio source switch
K 3.5mm Audio cable
L USB Charge cable
- Connect the USB charge cable to the USB port of your laptop or an USB wall charger.
2
- Connect the USB charge cable to the USB power input 'B'.
- Charge the battery for 3 hours.
- Power on the speaker by switching the power switch 'A' on the rear of the speaker.
3
- Press and hold the standby button 'J' for 3 seconds.
- The LED indicator 'D' will start flashing Blue/ Red alternating (paring mode).
If the LED indicator is not flashing blue/ red alternating. Press and hold the play/pause button for 5sec.
If a passcode is requested during the configuration of the device Use '0000'.
Pairing mode
Audio input mode
Bluetooth mode
2