Assembly; Installation; Operation - Primo Water 900178 Manual Del Usuario

ASSEMBLY

Keep plastic bags away from children.
1. Remove dispenser from packaging.
2. Unpack drip tray and insert into dispenser.
3. Remove protective packaging from around probe.
4. Properly dispose all of packaging.

INSTALLATION

1. Place dispenser upright.
2. Locate dispenser on a hard and level surface in a cool shaded location near a
grounded wall outlet.
3. Position dispenser so the back is at least 4 inches from wall and there are at least 4
inches of clearance on both sides.
4. To minimize vibration and noise, make sure dispenser is level.
Notice: Do NOT plug in power cord yet.

OPERATION

This unit is intended for water dispensing only. Do NOT use other liquids. Do NOT
use for other purposes.
This dispenser has been designed to use water bottles with 3, 5 and 5.2 gallon
capacity. Do NOT use alternative bottles.
Model # 900178: Page 5