CARAVITA BBKE Manual De Instrucciones página 6

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

While setting the ground sleeve BBKE into concrete, take into consideration the orientation of the umbrella. The BIG BEN
can only be installed to the ground anchor BBKE in the below specifi ed orientation. Pay close attention to the rectangular
shape umbrellas. NOTE: The position of the short and long sides is already set with the orientation of the ground sleeve!
octagonal
Ground sleeve
BBKE
Plug
Crank handle
Turn OFF the main switch. Remove the J Box face-
plate without cable (Version 1 on pg. 4) that comes
already installed on your J Box.
Using the face plate cover with the cable (Version
2 on pg 4) connect the lower plug to your power
supply inside the J Box.
Turn OFF the main switch. Remove the cover from
the mast. Loosen the clamp and pull the plug from
the socket.
Remove the faceplate with the cable (Version 2, pg 4)
and pull the lower plug from the power supply inside
of the J Box.
BBKE Page / Seite / Page / Página 6
SETTInG THE uMBrELLA-orIEnTATIon GuIDE
Square
Ground sleeve
Plug
Crank handle
connEcTInG THE HEATInG/LIGHTInG
DISconnEcTInG THE HEATInG/LIGHTInG
BBKE
Install the faceplate cover and secure with screws
(included). Make sure the rubber gasket seal is se-
cure to insure the J Box remains waterproof.
Connect the upper plug of the faceplate to the so-
cket at the lower end of the umbrella mast. Secure
the plug wit the clamp. Fasten the metal cover to
the mast. Turn ON the main switch.
Close the J Box with the faceplate without cable
(Version 1, pg 4). Secure the faceplate with rubber
gasket prior to closing to insure the J Box remains
waterproof.
rectangular
Ground sleeve
BBKE
Plug
Crank handle
Short strut
Tabla de contenido
loading

Productos relacionados para CARAVITA BBKE

Tabla de contenido