Sig - PAC 20462 Guia De Instalacion

Introduction
The PC Interface kit has two functions:
1. To allow ID devices (cards or tokens) to be read by a PC running PAC access control software.
2. Optionally to provide extended direct communications between a PC and a controller.
Installation
•
Ensure your product comes with the items indicated on page 2; if not please contact your
dealer.
• Before opening the unit ensure that it is disconnected from its power supply.
• To open the case remove all screws from the underside.
•
Use the cable ties provided to secure the cables outside the unit.
Connect to a Standard Reader
Connect to a Desktop Reader
Connect to a Wiegand Interface
For correct operation ensure that jumper J1 is set to closed on the Wiegand Interface.
!
Connect Wiegand Interface to a Wiegand Reader (reader not provided)
!
Consult your Wiegand Reader's documentation before connecting it.
Connect to the PAC Magstripe Reader
Connect to the PC Serial Port (using lead provided)
17469v2.2
GND ------
VCA ------

SIG

------
V ------
GND ------
VCA ------
SIG ------
V ------
J1 GND ------
SIG ------
VCA ------
+18V ------
+5V ------
W0 ------
W1 ------
LED ------
B1 ------
TMP ------
DC ------
GND ------
GND ------
VCA ------
SIG ------
V ------
Rx ------
Tx ------
CTS ------
DCS ------
GND ------
(-V) Green
(VCA) Yellow
(SIG) White
(+V) Brown
(-V) Green
(VCA) Yellow
(SIG) White
(+V) Brown
(-V) Green
(VCA) Green/White
(SIG) Brown/Yellow
(+V) Red
+5V
W0
W1
LED
N/A
GND
GND
GND
(-V) Green
(VCA) Yellow
(SIG) White
(+V) Brown
3 Tx Red
2 Rx Brown
4 DTR White
7 RTS Green
5 GND Black
English
5