Protection
Compatibility
Checking Capacity Status
Press the switch button, the LED indicator will show the capacity.
● Capacity under 6%, it will turn red and blink rapidly for several
seconds.
● Capacity 6%-15%, it will turn red and blink for several seconds.
● Capacity 15%-50%, it will turn orange and blink for several seconds.
● Capacity 50%-80%, it will turn green and blink for several seconds.
● Capacity 80%-100%, it will turn blue and blink for several seconds.
Charging the Power Bank
1. Connect your power bank using the micro USB cable that is
included. You can charge your power bank by PC USB port or using
an AC power adapter
correctly, it will now start charging.
2. When charging, the LED indicator will blink slowly like breathing.
The LED will indicate the capacity status while charging.
3. When fully charged, the LED will remain a blue light on.
4. After you have finished charging, please disconnect the cable
from the power bank, the LED light will turn off automatically.
Charging USB Devices
1. Plug the standard USB end into the power bank
2. Use the other end of the cable and plug it into the device.
When connected correctly it will now start charging.
3. The LEDs will indicate the capacity status of power bank while
charging and the LED indicator will blink slowly like breathing.
4. When the power bank completely finishes charging, the LED will
remain with its light on. The LED will indicate the last capacity
status.
EN – 2
Short circuit, Overcharge
Over discharge, Over load
Made for most rechargeable USB
devices (such as smart phones,
tablets, etc.)
(recommended 1A current)
. When connected
Power Bank