V-TAC VT-2000WRD Manual De Instrucciones página 11

NOTE: The device will indicate a beep sound while setting the functions
FUNCTIONS
(Mode, Time, Temperature, "+" & "-" )
ICON
°C
TABLE 1
NAME
After powering ON main plug, turn the side switch ON (Refer
Power
Figure 1 Point E). Press the power button to activate the device
in standby mode.
V-TAC Glass Convector Heater offers multiple heating modes.
Press the Mode button on the touch panel or remote control
to switch between different heating modes as mentioned below.
Mode
1. Frost Mode - Operates at 1.5W (
2. Low temperature - Operates at 1000W (
3. High temperature - Operates at 2000W (
Press the temperature button on the touch panel/remote control
once, the icon on display will flash. Press "+" or "-" to select
Temperature
the desired temperature from a range of 15°C-35°C. The
temperature indicator will remain lit for a longer period of time
FUNCTION
10
ENGLISH
)
)
)