DESCRIPTION G50022
1. Front mist plate
5. Guard Mounting Nut
9. Base
13. Plastic Tube
ASSEMBLING
The fan motor can work even if the protective grids have not yet been assembled
and fixed. To ensure the maximum safety, perform the installation completely
before operating.
1. Mount the base (9) securing it to the body (8) with the nuts (11) and insert the
4 wheels (10) into the base.
2. Place the pole (9) on the body (8) and secure it by tightening the knob.
3. Place the rear grid (6) on the motor body (7) with the metal handle facing upwards and lock the two parts
with the retainer (5).
4. Insert the fan blade (4) in the motor shaft and tighten the lock (3).
5. Loosen the screw securing the ring (14) on the front grid (2). Do not fully unscrew the screw.
6. Place the front grid (2) in front of the rear one with retaining screw facing down and fasten the clips.
Tighten the screw on the fixing ring to attach the two grids.
The fan assembly is now complete. The fan is now correctly assembled.
REFILLING WATER TANK
Place the fan on a stable surface and add water to
activate the mist function. Operate as shown in
the following figures. Remove the water
container (16) from the body (8), fig 1. Unscrew
the cap on the bottom of container, fig.2, and
pour water, paying attenction to not fill over the
maximum capacity.
CONTROL PANEL
A. Display LED
B. MODE indicator
C. SPEED indicator
D. Speed button
E.
TIMER button
F.
ON/OFF button
G. Mist indicator
H. Oscillation indicator
I.
Mist button
L.
Oscillation button
REMOTE CONTROL
Open the cover on the back of the remote control and insert 2 x 1.5 V AAA
type batteries following the correct polarity (+/-) shown inside the
compartment. Close the door before using remote control.
NOTES
- Do not use an old and a new battery together at the same time.
- Remove the batteries if you will not use the remote for an extended period of time.
- The recommended period of efficiency of a battery should be about 6-12 months of normal use. The
recommended period is shown on the battery or on the packaging. If you use the batteries for a long time,
2. Front Guard
6. Rear Guard
10. Castor wheels
14, Grill fixing ring
3. Blade cap
7. Motor Housing
11. Base Nut
15. Display
4. Blade
8. Body
12. Pole
16. Container
11