The entire team at Oxygen Audio congratulates you on your purchase and thanks you for your confidence. You are in
The entire team at Oxygen Audio congratulates you on your purcha
The entire team at Oxygen Audio congratulates you on your purcha
The entire team at Oxygen Audio congratulates you on your purcha
possession of a piece of quality and high technology equipment.
possession of a piece of quality and high technology equipment.
possession of a piece of quality and high technology equipment.
possession of a piece of quality and high technology equipment.
In order to get the best from the equipment, to master its capabilities and to avoid any possible risks, we recommend
that you read this manual carefully before carrying out any operations.
A loud-speaker is designed to operate with an alternative signal (sinusoidal), and as such, positive oscillations (fig. A) push the
membrane forward and negative oscillations (fig. B) pull it back. See the diagrams below to understand how this works:
A break in this alternative signal (fig. C), would destroy the coil receiving the electricity in the heart of the loud-speaker. As it can no
longer generate a magnetic field (using alternating current), it receives a direct current which burns it. In the same way if you connect
the "+" and the "-" of a battery with a 16mm² cable, the cable burns. Burned-out coils are therefore excluded from the terms of
the warranties. Contrary to popular belief, when a loud-speaker receives too much power, the coil cuts out like a fuse. The only way
to burn it out is to generate a direct current. This direct current is usually generated by end-of-power arrival from the amplifier
connected (incorrect setting, incorrect power, incorrect cabling or just too low power of the amplifier).
Installation of this type of amplifier requires the installation of a special power supply
and professional mounting.
Therefore, Oxygen Audio recommends that you have this equipment installed by an approved dealer.
If you decide to install it yourself, you should take great care with this step, it will be decisive for the proper functioning, the best
use and the long life of your product.
This apparatus has been designed to work in an ambient temperature range of - - - - 10 10 10 10° ° ° ° C C C C to + 60
your vehicle is within this range.
Cabling:
Cabling: all of your cables must pass through the inside of the vehicle, none of them must pass under the chassis!
Cabling:
Cabling:
Use rubber grommets to protect cables passing through metal panels.
Oxygen Audio recommends the use of O2 Link
Operating principle
Operating principle
Operating principle
Operating principle
fig. A
the installation of a special power supply (cable size, capacitor & battery) and methodical
the installation of a special power supply
the installation of a special power supply
O2 Link connectors.
O2 Link
O2 Link
se and thanks you for your confidence. You are in
se and thanks you for your confidence. You are in
se and thanks you for your confidence. You are in
fig. B
Installation
Installation
Installation
Installation
none of them must pass under the chassis!
none of them must pass under the chassis!
none of them must pass under the chassis!
+ 60° ° ° ° C C C C . Ensure that the temperature in
+ 60
+ 60
EN
fig. C
5